Micro Motion Compact Density Meter Consisting of CDM100P Sensor and 2700 Transmitter

Accuracy (liquid): ±0.1 kg/m³ (±0.0001 g/cm³) Repeatability: ±0.02 kg/m³ (±0.00002 g/cm³) Operating density range: 0–3000 kg/m³ (0–3 g/cm³) Sensor maximum working pressure: 150 barg (2,175 psig) or flange limit Operating temperature range: –58 °F to +400 °F (–50 °C to +204 °C) Flow rate indication (velocity): Accuracy:±5% of reading with 10:1 turndownNominal flow rate (bidirectional):13 m³/hNominal velocity (bidirectional):10 m/sec (32.8 ft/sec) Materials: Process connections:316L stainless steelMeasurement tubes:Nickel alloy C-22 (or UNS 06022)Sensor housing:316L stainless steelTransmitter housing: Polyurethane-painted aluminum Local display (optional): Segmented two-line LCD screen.Can be rotated on transmitter, in 90-degree increments, for ease of viewing.Suitable for hazardous area operation.Optical switch controls for hazardous area configuration and display.Glass lens.&Three-color LED indicates meter and alert status. Display functions: View process variables.View and acknowledge alerts.Configure mA and RS-485 outputs.Supports Known Density Verification (KDV).Supports multiple languages. Transmitter output channels: Available output channels (depending on the Electronics Interface option):One or two externally powered (passive) 4–20 mA outputsChannel A is 4–20 mA + HARTChannel B is 4–20 mAOne externally powered (passive) Time Period Signal (TPS) outputOne externally powered (passive) Discrete outputOne Modbus/RS-485 output Can also be ordered with a processor for use with a remote-mount 2700 FOUNDATION fieldbus Meter approvals, calibrations, and certifications: Agencies & types of approval available:ATEXCSAIECEx Output variables: Mass & volume flowNet product content / flowTemperatureDensityConcentration Local display: Standard user interface with 2-line LCD panelTwo optical switches for local operationGlass or plastic lens options Power: Self-switching AC/DC input, automatically recognizes supply voltage85 to 265 VAC, 50/60 Hz, 6 watts typical, 11 watts maximum18 to 100 VDC, 6 watts typical, 11 watts maximumComplies with low voltage directive 2006/95/EC per EN 61010-1 (IEC 61010-1) with amendment 2, and Installation (Overvoltage) Category II, Pollution Degree 2 Input/output signals: Not intrinsically safeAnalog output option:One active 4–20 mA outputOne active frequencty outputFrequency output can be configured as a discrete outputConfigurable I/O option:One or two active 4-20 mA outputsOne or two active/passive frequency outputsOne or two active/passive discrete outputsOne discrete inputIntrinsically safeAnalog output option:One passive 4-20 mA outputOne passive frequency outputFrequency output can be configured as a discrete outputFoundation™ fieldbus (Obsolete)optionally non-incendiveOne Foundation fieldbus H1 outputPROFIBUS-PA (Obsolete)One PROFIBUS-PA output HART/WirelessHART: Bell 202 signal is superimposed on the primary milliamp outputWirelessHART available via THUM adapterHART communication is unavailable on Foundation fieldbus and PROFIBUS-PA transmitter versions Mounting options: Field-mountIntegrally mounted to a Micro Motion F-Series, R-Series, or H-Series sensorRemotely mounted to any 4-wire or 9-wire Micro Motion Coriolis sensor Application types: Continuous process controlCustody transferTwo-phase flow/entrained gasMeter verificationSIS Certified Hazardous approvals: Class I, Div. 1Class I, Div. 2Zone 1Zone 2 HART/WirelessHART: Bell 202 signal is superimposed on the primary milliamp outputWirelessHART available via THUM adapterHART communication is unavailable on Foundation fieldbus and PROFIBUS-PA transmitter versions Mounting options: Field-mount•Integrally mounted to a Micro Motion F-Series, R-Series, or H-Series sensor•Remotely mounted to any 4-wire or 9-wire Micro Motion Coriolis sensor Application types: Continuous process controlCustody transferTwo-phase flow/entrained gasMeter verificationSIS Certified Hazardous approvals: Class I, Div. 1Class I, Div. 2Zone 1Zone 2